Check back regularly or subscribe for updates. Email us at jnkaudiodesign@gmail.com, or fill in the form on the left.

Saturday, March 12, 2016

Toroid Isolation Transformer Prices

Toroid Isolation Transformer

Power conditioning is a critical component of a complete HIFI system. One would never realize the full potential of their HIFI system until proper power source is supplied to their equipment. 

Nowadays, the incoming mains are filled with all sorts of noise riding on them. Lots of these rubbish are entering the HIFI chain and causing all sorts of issues like humming, noise, heating, harshness, sibilance, noisy background and all sorts of other negative factors. 

There are many types of power conditioning, and isolation transformer is one of the most effective method of conditioning. Isolation transformers have been used in hospitals, factories, R&D laboratories and many other facilities with sensitive electronics. 

Now, these isolation are quite common in home audio due to the effectiveness of such devices. 

J&K isolation transformer capacity - up to 3KVA (maximum size for grade A1 made in Japan toroid core)
- 3KVA unit is U$790 for isolation transformer only
- built unit vary in prices due to accompanying accessories and components

Options
  • soft start, must for toroid transformer above 500VA (not sold separately due to limited stock)
  • DC filter, must for toroid transformer to prevent DC saturation/hum
  • EMI/RFI filters, clean up incoming and outgoing EMI/RFI
  • single or dual display (input / output) 
  • different grades of audiophile IEC output sockets 
  • balanced or single ended output
  • potting, must for lower noise operation and shielding
  • electrostatic shield 

Notes:
  • other toroid core grades are available but not recommended due to less ideal electrical properties, higher loss, higher operating temperature 
  • we would recommend separate individual isolation for each individual equipment than a big toroid transformer with everything connected (shared) to it (audio gears generate noises themselves and cross-pollute each other) 

Fully built audiophile balance power isolation transformers (with chassis, sockets, meters and etc) using Grade A1 toroid (highest grade toroid core, extremely low loss, high permeability, low operating temp, potted, made in Japan)
- 2.0KVA U$1220
- 2.5KVA U$1370
- 3.0KVA U$1472
- 3.5KVA U$1620 (max size for grade A1 core, other cores available)

Fully built audiophile balance power EI Z9-Z11 Standard Isolation Transformer (with chassis, sockets, meters and etc, using 0.27-0.35mm SiFe Grain Oriented (Hi-B), made in Japan)
- 1.0KVA U$1190  
- 1.5KVA U$1740
- 2.0KVA U$2040
- 3.0KVA U$2390
- 4.0KVA U$2690 

Audiophile balance power ULTRA Isolation Transformer (SiFe Grain Oriented (Hi-B), made in Japan)
- 500VA - U$390
- 750VA - U$540
- 1000VA - U$690
- 1500VA - U$1240
- 2000VA - U$1540
- 3000VA - U$1890

Note: 
  • EI balance power isolation is best for HIFI / Stereo use, projectors, tube amplifiers, front end (source, pre-amp) - warmer and quieter
  • Toroid is better for AV amplifiers, high power systems - dynamic and fast
  • Professional grade equipment case are available for international shipment


Soft-start and EMI/RFI filter

Audiophile IEC sockets

Dual Display - input and output voltage

Potted toroid transformer, industrial grade power distributor

Testing for shorts

Potted 2.5KVA isolation transformer

Some previous postings for your reference: 


Toroid Isolation Transformer
Isolation Transformer
Isolation Transformer Review

J&K Audio Design
3/12/2016

Product Lists  

Level 0




Level 3: depends on type, size and complexity. Email us for details.

Iso-trans: link 1, link 2
* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.  

* Our product lines are always improving and increasing. If you do not see what you want, contact us!  
* Please email for volume discounts, distributor and OEM pricing.

Search This Blog

Product Lists

Product Lists

Level 0: link 1

Level 1: link 1, link 2, link 3, link 4

Level 2: link 1, link 2, link 3, link 4, link 5, link 6, link 7, Link 8, link 9

Level 3: depends on type, size and complexity. Email us for details.

Iso-trans: link 1, link 2

Power-trans: link 1

* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.

* Our product lines are always improving and increasing. If you do not see what you want, contact us!

* Please email for volume discounts, distributor and OEM pricing.

Follow by Email

Follow us using Google+ Badge to get instant updates!

Google+ Followers